Kitchen Remodeling in Tarrant County, TX
Planning a kitchen in Tarrant County? Compare 10 communities side by side, from Bedford to Southlake, with local costs and housing data.
Talk to a kitchen specialist about your Tarrant County project: scope, materials, timing and cost.
Kitchens across Tarrant County: what local homes call for
Across Tarrant County, median build years run from about 1968 in Haltom City to 2004 in Keller, with a county-wide figure near 1989. Older pockets tend to call for wiring and plumbing checks, while newer ones are mostly about finishes and layout.
County-wide, median home value is about $424,000 (about 27% above the national median of $333,000), with Haltom City at the lower end near $212,000 and Southlake at the top near $1,008,000.
Roughly 63% of households in these communities own their home and 71% of the housing is single-family. Only about 15% of homes predate 1970, so most Tarrant County projects are about finishes, storage and flow rather than hidden repairs.
Source: U.S. Census Bureau, American Community Survey 2020-2024 5-year estimates, weighted by population across the communities covered. Figures are estimates.
Average kitchen remodel cost in Tarrant County
Remodeling costs in Tarrant County depend on scope far more than on address, but local pricing still matters. Based on housing values across the county, we estimate costs about 10% above the national baseline.
Cabinet refacing or painting, new hardware, backsplash, lighting and fixtures, with the layout and appliances mostly staying put.
New cabinets, countertops, flooring, sink and appliances in the existing layout, plus updated lighting and a fresh backsplash.
Layout changes, custom or semi-custom cabinetry, premium stone, wall removal or relocation of plumbing and gas, and high-end appliances.
Costs vary within the county. A mid-range remodel runs about $23,000 to $51,000 in Haltom City and about $36,000 to $80,000 in Southlake, so check the page for your own community. Treat all of these as planning estimates and get a written quote before you commit.
For prices by project and kitchen size, see the Texas kitchen remodel cost guide.
Compare Tarrant County communities
Median home value, home age and a typical mid-range remodel estimate for each community we cover in Tarrant County. Select a community for its full local guide.
| Community | Median home value | Median year built | Owner-occupied | Typical mid-range remodel |
|---|---|---|---|---|
| Bedford | $347,000 | 1982 | 51% | $26,500 to $59,000 |
| Colleyville | $782,000 | 1994 | 97% | $36,000 to $80,000 |
| Euless | $322,000 | 1987 | 39% | $25,500 to $57,500 |
| Fort Worth | $279,000 | 1986 | 67% | $24,000 to $54,000 |
| Grapevine | $489,000 | 1992 | 52% | $30,500 to $67,500 |
| Haltom City | $212,000 | 1968 | 50% | $23,000 to $51,000 |
| Hurst | $299,000 | 1976 | 60% | $25,000 to $55,500 |
| Keller | $456,000 | 2004 | 73% | $29,500 to $66,000 |
| North Richland Hills | $361,000 | 1986 | 63% | $27,000 to $60,000 |
| Southlake | $1,008,000 | 1997 | 95% | $36,000 to $80,000 |
Costs are estimates for an average-size kitchen, not quotes.
Around Tarrant County
Well-known places across Tarrant County include American Airlines C.R. Smith Museum, Panther Field at Colleyville-Heritage, and NRH2O. Our service area reaches all of the communities below, from Bedford to Southlake.
- American Airlines C.R. Smith Museummuseum, near Bedford
- Panther Field at Colleyville-Heritagepark, near Bedford
- NRH2Opark, near Bedford
- NYTEX Sports Centrevenue, near Bedford
- Pennington Fieldvenue, near Bedford
- Grapevine Lakelake, near Grapevine
- The King's Universitycollege, near Grapevine
- Irving Mallshopping center, near Euless
Permits, licensing and timing in Tarrant County
Kitchen work in Tarrant County follows the local building codes adopted by your city, administered by the city permit office in the community where you live, so requirements and processing times can differ between neighboring places such as Bedford and Colleyville.
Because Texas has no statewide general contractor license, it is even more important to check references, insurance and the trade licenses for electrical and plumbing work.
Tarrant County has long hot summers and shifting humidity. Shifting soil can move foundations in some Texas neighborhoods, so ask installers how they handle out-of-level floors and walls.
Cooler months are comfortable for demolition and deliveries, and are typically when homeowners plan bigger kitchen projects.
Kitchen services for Tarrant County homes
Given the age and value of housing across Tarrant County, these services come up most often.
Full Kitchen Remodeling
Complete gut-and-rebuild renovations, from demolition to the final walkthrough.
Learn moreKitchen Island Installation
Add prep space, storage and seating with a custom or built-in island.
Learn moreBacksplash Installation
Tile, stone slab and glass backsplashes that protect walls and finish the design.
Learn moreCabinet Painting & Refinishing
Professional spray finishes that renew cabinets in a new color or stain.
Learn moreCabinet Refacing
New doors, drawer fronts and veneers on your existing cabinet boxes.
Learn moreCountertop Installation
Quartz, granite, marble and more, templated, fabricated and installed precisely.
Learn moreRange Hood & Ventilation
Range hoods, custom hood surrounds and ductwork that actually vent cooking air.
Learn moreKitchen Lighting Upgrades
Layered ambient, task and accent lighting that makes a kitchen work and glow.
Learn moreMore areas near Tarrant County
Kitchen remodeling in Tarrant County: common questions
How much does a kitchen remodel cost in Tarrant County?
We estimate a mid-range kitchen remodel in Tarrant County at $28,500 to $64,000, a lighter refresh at $10,000 to $24,000, and a major remodel at $68,500 to $137,500 or more. Pricing is about 10% above the national baseline. These are planning estimates, not quotes.
Do I need a permit for a kitchen remodel in Tarrant County?
Electrical, plumbing, gas and structural work generally require permits under the local building codes adopted by your city, while cosmetic updates like painting or new counters usually do not. The city permit office in your community can confirm what applies, and requirements can differ between Bedford and Southlake.
Which communities in Tarrant County do you cover?
We cover 10 communities across 17 ZIP codes in Tarrant County, including Bedford, Colleyville, Euless, Fort Worth, Grapevine, Haltom City, Hurst, and Keller and 2 more.
Which parts of Tarrant County have the oldest and newest homes?
Based on Census estimates, median homes in Haltom City date to about 1968, the oldest in the county we cover, while Keller has the newest at about 2004. Older homes often need more electrical and plumbing attention during a remodel.
How do I get a kitchen remodel quote in Tarrant County?
Call (833) 838-1905 and tell the specialist which community you are in, how large the kitchen is and what you want to change. They will walk through next steps and what a written quote needs.
Planning a kitchen in Tarrant County?
Call to talk through your project. Mention your community in Tarrant County.